An Implementation of Reconfigurable Network Control based upon Automata Proposal for Three Conveyor Belt Case Study
Abstract
Online reconfiguration performed by a computer network system needs to be addressed from several perspectives due to complexity onto the system. This paper proposes different modeling approximations to obtain a holistic view of reconfiguration onto complex systems. First model is dynamic system modeling, second is an automaton in order to bound possible scenarios and third model is a Real Time scheduling algorithm to match possible configurations and related control laws.References
BenÃtez-Pérez H. and GarcÃa-Nocetti F., Reconfigurable Distributed Control, Springer Verlag, 2005.
Blanke M. and Kinnaert M. and Lunze J. and Staroswiecki M., Diagnosis and Fault Tolerant Control, Springer, 2003. http://dx.doi.org/10.1007/978-3-662-05344-7
Cervin A. and Henriksson D. and Lincoln B. and Eker J. and Arzén K., How Does Control Timing Affect Performance, IEEE Control Systems Magazine, Vol. 23, pp. 16-30, 2003. http://dx.doi.org/10.1109/MCS.2003.1200240
Gudmundsson D. and Goldberg K., Tuning Robotic Part Feeder Parameters to Maximize Throughput, Assembly Automation Publisher: MCB University Press, Vol. 19, No. 3, pp216-221, 1999. http://dx.doi.org/10.1108/01445159910280083
Izadi-Zamanabadi R. and Blanke M., A Ship Propulsion System as a Benchmark for Fault-Tolerant Control, Control Engineering Practice, Vol. 7, pp. 227-239, 1999. http://dx.doi.org/10.1016/S0967-0661(98)00149-X
Jiang J. and Zhao Q., Reconfigurable Control Based on Imprecise Fault Identification, Proceedings of the American Control Conference, IEEE, pp. 114-118, San Diego, June, 1999. http://dx.doi.org/10.1109/acc.1999.782751
Khalil H., Nonlinear Systems, Prentice Hall, 2002.
Nilsson, J., Real-Time Control with Delays, PhD. Thesis, Department of Automatic Control, Lund Institute of Technology, Sweden, 1998.
Thompson, H., Wireless and Internet Communications Technologies for monitoring and Control, Control Engineering Practice, vol. 12, pp. 781-791, 2004. http://dx.doi.org/10.1016/j.conengprac.2003.09.002
Wu N., Reliability of Reconfigurable Control Systems: A Fuzzy Set Theoretic Perspective, Proceedings of the 36 th Conference on Decision & Control, IEEE, TP15 5:10, pp. 3352-3356, San- Diego, USA, 1997. http://dx.doi.org/10.1109/cdc.1997.652364
Published
Issue
Section
License
ONLINE OPEN ACCES: Acces to full text of each article and each issue are allowed for free in respect of Attribution-NonCommercial 4.0 International (CC BY-NC 4.0.
You are free to:
-Share: copy and redistribute the material in any medium or format;
-Adapt: remix, transform, and build upon the material.
The licensor cannot revoke these freedoms as long as you follow the license terms.
DISCLAIMER: The author(s) of each article appearing in International Journal of Computers Communications & Control is/are solely responsible for the content thereof; the publication of an article shall not constitute or be deemed to constitute any representation by the Editors or Agora University Press that the data presented therein are original, correct or sufficient to support the conclusions reached or that the experiment design or methodology is adequate.
